Clogged Furnace Condensate Drain: Why a High-Efficiency Furnace Stops
Learn how a clogged condensate drain can stop a high-efficiency furnace, what water clues are safe to inspect, and why vent and pressure checks still matter.
-
-
Occupancy Heat Gain in AC Load Calculations
People add sensible and latent heat to a home, but occupancy is only one part of the cooling load.
-
Superheat Too High: Causes and What Technicians Check
High superheat can reflect low evaporator feeding, undercharge, restriction, high load or measurement error. Learn how technicians separate the causes.
-
Heat Pump Runs Constantly in Winter: Is That Normal?
Long heat-pump runtime can be normal in cold weather. Learn how indoor temperature trend, auxiliary heat, airflow and model capacity show when service is needed.
-
Can a Dirty Filter Make a Furnace Short Cycle?
A dirty furnace filter can restrict airflow and open the high limit, but it is not the only cause of short cycling. Learn the safe checks and measurements.
-
How Humidity Changes a Manual J Cooling Load
Learn how outdoor moisture, infiltration, ventilation, occupants and indoor design conditions create latent load inside a Manual J cooling calculation.
-
Manual J Heating Design Temperature Explained
Heating design temperature is a standardized local weather condition used to calculate peak load—not the coldest temperature ever recorded.
-
Bedroom Return Air Problems: Why Rooms Get Hot With the Door Closed
A bedroom can get hot with the door closed when supply air cannot return to the system without a pressure path.
-
Kitchen Heat Gain and AC Sizing: Appliances, Sun, and Runtime
Kitchen heat gain affects AC runtime and room comfort, but it should be counted as an internal load rather than guessed as extra tonnage.
-
Cold-Climate Heat Pump vs Standard Heat Pump
Compare cold-climate and standard heat pumps using certified low-temperature capacity, COP, controls, sizing and backup needs—not marketing labels.